|
Post by fletch on Apr 30, 2014 12:28:17 GMT
I'd be grateful if anyone knows for certain which manufacturers awning brackets these are & if so what models. I've approached two M/H dealers who can't tell me. The awning was removed before I bought the van & I wouldn't mind replacing it! Attachments:
|
|
|
Post by n brown on Apr 30, 2014 14:26:00 GMT
they could be old fiamma brackets,but i'd need to hold one up against it to be sure.just looked at a spare one,the bottom bit is squarer,top to bottom is 12 cms
|
|
|
Post by Firefox on Apr 30, 2014 17:02:01 GMT
I'd be grateful if anyone knows for certain which manufacturers awning brackets these are & if so what models. I've approached two M/H dealers who can't tell me. The awning was removed before I bought the van & I wouldn't mind replacing it! Looks very similar to the Fiamma AS120 or AS400 to me. Check out the profiles on www.johnscross.co.uk/fiamma-awning-fixing-kits.htmlThey may have drilled a couple of extra holes to stabilise the bottom of the fixing? You can measure up yours and see if you match the dimensions of those brackets Edit: 140 changed to 120 (typo)
|
|
|
Post by fulltimer on Apr 30, 2014 17:37:18 GMT
Pretty sure they are Fiamma, but as already said they look to have had extra holes drilled. the problem isn't with the brackets as they are aluminium it is the bolts that have rusted they normally supply stainless steel bolts two for each bracket
|
|
|
Post by fletch on Apr 30, 2014 18:03:41 GMT
Thanks for your replies guys.
The brackets measure 120mm high x 178mm in length. The van is 1999 so I'd assume that the awning must have been either this age or newer. Looking at it again it appears that there was probably additional holes drilled, as each bracket has 2x s/s screws, 2 x matching mild steel screws & 2x machine screws. I'll have a look at your link on my PC later Firefox unfortunately my ipad & links don't always get along!
|
|
|
Post by Firefox on Apr 30, 2014 18:26:13 GMT
Thanks for your replies guys. The brackets measure 120mm high x 178mm in length. The van is 1999 so I'd assume that the awning must have been either this age or newer. Looking at it again it appears that there was probably additional holes drilled, as each bracket has 2x s/s screws, 2 x matching mild steel screws & 2x machine screws. I'll have a look at your link on my PC later Firefox unfortunately my ipad & links don't always get along! Looks like the Fiamma AS120 which are 120mm high (with additional retrofit holes) www.johnscross.co.uk/fiamma-awning-adapter-kit-as120.htmlYou should be able to get a Fiamma awning to fit those
|
|
|
Post by fletch on Apr 30, 2014 21:34:34 GMT
Yes I think it is a fiamma looking at the diagram. I'll pop the van into johns cross & see if they'll have a look to confirm when I'm over that way as it's not too far. Thanks again all!
|
|
|
Post by Firefox on May 1, 2014 10:23:12 GMT
No probs. Amazing that two dealers didn't have have any clue what make, they must see these kind of things all the time.
|
|
|
Post by n brown on May 1, 2014 12:31:03 GMT
you get brackets with an awning if you're buying new
|
|