|
Post by Etienne Le Croq on Dec 14, 2012 14:13:03 GMT
Cutting holes in metal is easy when you use hole saw.If you need to cut holes in your van floor for gas drop out holes or drainage pipes.They cut nice accurate holes.Make sure that you buy a decent make though as they will last more than one hole.A recommended make is Starrett or Bosch. m.screwfix.com/p/starrett-20mm-holesaw/95906?filtered=true
|
|
|
Post by Firefox on Dec 14, 2012 14:27:10 GMT
Hole sawsAnother way to make a large hole is drill several 12mm holes close together and then jiggle the drill bit around sideways till they all join up. This is not to be recommended as it is messy and the bit might break but it will work in an emergency!
|
|