Post by account_disabled on Dec 11, 2017 8:35:09 GMT
Hi,
Not sure where to start, I have several things in mind...
Maybe first a big thanks! It's an amazing and interesting project!
Before mysensors I used Z-Wave (and custom stuff over WiFi), but I faced some problems with it and it costs much. It is closed source and for me not well documented enough. Many manufacturers seem to not test it in real environments (compatibilty to other products/range).
Someone on domoticz forum told me he switched to mysensors, so I thought to give it a try.
So far I built some nodes and got some experience. I'm using NRF24L01(+), gateway on a WiFi ESP8266, integrated into domoticz.
Maybe some of the following questions I could answer by myself after research, but if you know it on the spot, I would be quite happy if you can share it 🙂
My problems/questions/experiences are:
Some days ago a temperature node with DS18B20 reported 0.0°C. This sensor was working for around a month. It for sure was 15°C or more. I'm using DallasTemperature Lib v3.7.7. I think this is related to an invalid read of my temp sensor. After that it continued to work, but now it reports 2x S_DOOR with the first having V_TEMP in domoticz (probably correctly measured). How a S_TEMP can become a S_DOOR with temperature?
1a) Is there any code implemented to restart the node automatically? What will happen if a SPI or I²C connection needs again a setup()?
I bought some chinese clones that did not work. Took me some hours to find out what's going on...
2a) What about selling kits containing every needed component? Of course genuine parts for a fair price.
2b) Is that possible if a third party will do it (license)?
Please help.
Thanks!
I didn't find the right solution from the Internet.
References:
forum.mysensors.org/topic/7976/experiences-problems-and-questions
Lean Management Marketing Examples
Not sure where to start, I have several things in mind...
Maybe first a big thanks! It's an amazing and interesting project!
Before mysensors I used Z-Wave (and custom stuff over WiFi), but I faced some problems with it and it costs much. It is closed source and for me not well documented enough. Many manufacturers seem to not test it in real environments (compatibilty to other products/range).
Someone on domoticz forum told me he switched to mysensors, so I thought to give it a try.
So far I built some nodes and got some experience. I'm using NRF24L01(+), gateway on a WiFi ESP8266, integrated into domoticz.
Maybe some of the following questions I could answer by myself after research, but if you know it on the spot, I would be quite happy if you can share it 🙂
My problems/questions/experiences are:
Some days ago a temperature node with DS18B20 reported 0.0°C. This sensor was working for around a month. It for sure was 15°C or more. I'm using DallasTemperature Lib v3.7.7. I think this is related to an invalid read of my temp sensor. After that it continued to work, but now it reports 2x S_DOOR with the first having V_TEMP in domoticz (probably correctly measured). How a S_TEMP can become a S_DOOR with temperature?
1a) Is there any code implemented to restart the node automatically? What will happen if a SPI or I²C connection needs again a setup()?
I bought some chinese clones that did not work. Took me some hours to find out what's going on...
2a) What about selling kits containing every needed component? Of course genuine parts for a fair price.
2b) Is that possible if a third party will do it (license)?
Please help.
Thanks!
I didn't find the right solution from the Internet.
References:
forum.mysensors.org/topic/7976/experiences-problems-and-questions
Lean Management Marketing Examples