|
Post by kernowjon on Nov 15, 2016 8:54:06 GMT
This is a plea for help.
I have converted a LDV Convoy disabled minibus. I decided to remove the factory fitted rooflight to replace with a Fiamma.
I removed all the fixings and fittings (unusually the screws were external) but the frame will not budge - even after hitting with a heavy hammer any ideas?
Jon
|
|
|
Post by molly2 on Dec 2, 2016 1:14:20 GMT
Is it also bonded in with a sikaflex type sealer ,if so you may have to cut it out with long bladed Stanley knife .or some sealers give way warming with a heat gun .
|
|